LMS Continuing Education Courses |
Test Content Pre_Page_contentSearch found results
All Courses CalARP (6) HazWaste (13) UST (7) Admin/Mgt/Leadership (1) APSA (8) Industry (1) Emergency Response (2) Potpourri (5) HMBP (3) Demonstrations (1)
Objective This session will provide insight for participants to evaluate the effectiveness of a PHA and identify potential gaps in safety.
Description This session will provide information on an effective PHA process and act as a guide of best practices for industry and inspectors to utilize in the preparation, facilitation and management of recommendations to improve safety. Topics of discussion will include techniques to better identify hazards; integrate previous incidents; document containment and controls, safeguards and mitigation measures; and understand the consequences of failure.
Objective This presentation reviews all the recent changes to IIAR standards.
Description Over the past few years IIAR has published several notable changes to their suite of standards. The point of this presentation will be to bring regulators up to speed on recent changes in the ammonia refrigeration industry. IIAR standards 2, 4, 5, 6, 7, 8 and 9 all have important changes relevant to our industry.
Objective Human factors in process safety are often misunderstood or confused with ergonomics; Course will help make that distinction very clear and provide a base knowledge on human factors that is consistent with the views of the American Institute of Chemical Engineers (AIChE) Center for Chemical Process Safety (CCPS).
Description This Course will discuss the broad definition of human factors, how they present themselves throughout other CalARP program elements, and when facilities should consider human factors issues. Additionally, an overview of the method used by Contra Costa Health Services (CCHS) to determine whether the qualifying stationary sources are systematically and adequately addressing human factors concerns as specified by CalARP regulations.
Objective Understand the general requirements of the CalARP program, including the definition of covered process and regulated substances.
Description The course is a comprehensive overview of the CalARP Program and includes the following:
1. Purpose and Scope
2. Definitions
3. Applicability
4. General Requirements
5. CalARP Program Management System
6. Emergency Information Access
7. Registration
8. RMP Components and Submission
9. Hazard Assessment
10. Prevention Programs
11. Emergency Response Program
12. Regulated Substances
Objective The purpose of this presentation is to provide instructions for performing a mechanical integrity inspection of an ammonia pressure vessel.
Description Mechanical integrity (MI) is a cornerstone of a CalARP Program. This presentation will provide instructions for performing an MI inspection of an ammonia refrigeration pressure vessel using the checklists contained in ANSI/IIAR 6-2019 Appendix B. Topics covered will include:
- IIAR 6 Appendix B Checklists
- Labeling requirements
- Nameplates
- Types of corrosion
- Insulation
- Supports and foundations
- Relief valves
- Common deficiencies
Objective Intermediate review and explanation of the CalARP requirements with detailed examples of commonly regulated industries.
Description The CalARP 201 class is intended for those with a basic understanding of the CalARP regulation. It will provide a brief review of applicability and program level determination and differences, with an emphasis on detailed examples of compliance related to the various program elements (PHAs, MI, SOPs etc.) for prominent industries.
Objective This session will identify several useful exclusions from full regulation available for hazardous waste.
Description This course will identify and explain the conditional exclusions available for used oil filters, waste fuel filters, common vehicle batteries & household batteries, latex paint, reuseable soiled textiles, PCB Ballast, and more. It will also briefly identify and summarize the requirements for universal waste, waste oil, California empty containers, and other statutory exclusions and exemptions. It will not include recycling exclusions.
Objective Students will build on their previous hazardous waste characterization training by delving deeper into the definition of hazardous waste.
Description Every wonder why spent solvents are regulated at 10% or more? What are hazard codes and why do I care? Is my solvent-contaminated rag an ignitable D001 when I'm done cleaning with it; what about a spill? Why are some chemicals repeated in the F001 and F002? What is this whole "sole active ingredient" in unused chemicals all about? These questions and more will be answered as we delve deeper into understanding the nuances of waste identification.
Objective Review the Tiered Permitting Program (TPP) and its applicability to specific situations to improve understanding by generators and regulators.
Description After 30 years, the TPP often remains confusing for generators and CUPAs. As a key step in WW treatment and to reduce offsite haz waste disposal, its important that generators understand the TPP requirements and limitations. Its also important for regulators to understand when onsite processing may/may not be subject to jurisdiction. Case studies and compliance requirements for generators operating under different tiers will also be reviewed.
Objective To provide an overview of shooting range maintenance guidance.
Description Topics to be covered include an overview of the status of shooting range activities and waste under California Hazardous Waste Control Law.
Objective Students will learn the basic steps in the hazardous waste identification process.
Description Topics include: definitions, acronyms, common names of wastes, California chemical lists, federal vs. California classification schemes, waste classification flowchart, characteristic RCRA and Non-RCRA hazardous waste, RCRA hazardous waste from listed sources, three elements of the mixture rule (RCRA Wastes), regulatory exclusions, Universal Wastes, California waste codes, designated wastes, exemptions for specific substances, and special wastes.
Objective This course will provide a general overview of the recycling exemptions and exclusions for hazardous wastes.
Description The focus of the course is Health and Safety Code (H&SC) Section 25143.2. Students will gain a basic knowledge of the California regulatory and statutory provisions related to hazardous waste recycling and learn to apply statutory and regulatory recycling exemptions/exclusions to hazardous waste. The corresponding federal regulations are discussed as well as guidance to determine applicability of hazardous waste recycling exemptions/exclusions.
Objective Review the Tiered Permitting Program (TPP) and its applicability to specific situations to improve understanding by generators and regulators.
Description The TPP remains an area of confusion for generators and often for CUPAs. As a key tool to reduce offsite hazardous waste disposal, it's important that generators understand the TPP requirements and limitations. It's also important for regulators to understand when onsite processing may be subject to jurisdiction. Initial and ongoing compliance requirements for generators operating under different tiers (ex. Permit-By-Rule) will also be reviewed.
Objective To provide a systematic approach to the hazardous waste identification process, the relationship between RCRA and Non-RCRA wastes and their tests.
Description This 2-hr intermediate session covers the RCRA and CA waste identification requirements. It focuses on a systematic approach to the identification process, the hazardous waste characteristics and lists, the relationship between RCRA and non-RCRA hazardous wastes, and a practical approach regarding the toxicity characteristic in CA including when to use TTLC, TCLP and STLC. The class exercises on the identification of RCRA and Non-RCRA wastes.
Objective Obtain familiarity with HW rules and regulations. Learn what type of generator requirements apply to you and how to conduct simple HW inspections.
Description Presenters will go over the basics of hazardous waste regulatory requirements. Topics to include, but are not limited to:
-How to prepare for an inspection;
-Hazardous waste definitions;
-Waste determinations;
-Generator requirements based on generator status;
-Container standards and labeling requirements; and
-Common industry waste streams.
Tiered permitting, hazardous waste tank requirements and satellite accumulation will be introduced.
Objective This Course will provide detailed instruction for completion of the uniform hazardous waste manifest for both RCRA and non-RCRA hazardous waste.
Description This Course will describe how a California generator of hazardous waste (both RCRA and non-RCRA) must complete the uniform hazardous waste manifest. After an introduction to the manifest and its requirements, the Course will identify and explain each item (section) of the manifest and the information required there. The Course will not be a tutorial on the use of the eManifest System but will describe its affect on completion of the manifest.
Objective This Course will describe in detail the regulations for the generator consolidation of non-RCRA hazardous waste from remote sites.
Description This course will describe the California Health and Safety Code allowance for the consolidation of non-RCRA hazardous waste from remote sites to a generator site. It will also describe the requirements of the USDOT for the transportation of the non-RCRA hazardous waste as a hazardous material on public roads.
Objective Learn how to properly execute a manifest. Understand the necessary DOT rules required for the manifest. Learn how to construct a DOT proper shipping name for RCRA and non-RCRA hazardous waste. Identify the most common mistakes and how to avoid them
Description Approximately 50% of all manifests have mistakes on them that could lead to violations for your site. In this class we will learn how to properly fill out a Uniform Hazardous Waste Manifest, including the necessary DOT regulations. We will also learn how to create a DOT basic description and proper shipping name for both RCRA and non-RCRA hazardous waste, plus identify the most common mistakes and how to avoid them.
Objective Understand the satellite accumulation regulations.
Learn the unique Title 22 rules applicable to satellite accumulation.
Identify the most common violations and how to avoid them.
Learn EPA interpretations and guidance regarding satellite requirements.
Description No matter how long you have been managing hazardous waste, there is always something to learn about the satellite accumulation regulations. In this class we will discuss the satellite regulations, including those unique to California. We will also identify the most common violations associated with satellite accumulation, plus interpretations and guidance from the EPA and DTSC
Objective UST Red Tag Authority is formal enforcement. We will discuss step by step what is required and when it is appropriate and necessary.
Description How to apply Red Tag Authority per Title 23 and CHSC from the perspectives of a large PA and a small CUPA. We will share our processes which are slightly different but are both in compliance if followed. The key to each is documentation and communication.
Objective The information contained in this Course is intended to meet the requirements of the Unified Program Technical Training Framework and Improvement Strategies, Core Knowledge and Skills for satisfying Intermediate and advanced Underground Storage Tank (UST) inspector training.
Description This Course is intended to meet the requirements of the Unified Program Training Framework and Improvement Strategies, Core Knowledge and Skills for satisfying Intermediate and Advanced UST inspector training. The Course will cover the following topics:
Hydrostatic Interstitial Monitoring
Vacuum Interstitial Monitoring
Fail-Safe
Line Leak Detector Issues (e.g., pipe rise, ELLD programming)
USTs connected to TIUGAs
Compatibility
Tank Lining Issues
UST Closure
Troubleshooting UST issues
UST Red Tags
Objective This session will provide participants with a technical understanding of monitoring and testing compliance related to single-walled systems.
Description This course will cover technical requirements of single-walled underground storage tank systems. Topics discussed will assist local agencies in ensuring monitoring and testing compliance of single-walled systems, and assist UST stakeholders on compliance requirements after the December 31, 2025 closure deadline, to include new underground storage tanks designed and alternative construction options.
Objective Participants will learn techniques to prepare for and oversee a UST removal from plan check to closure letter.
Description Whether you've never performed a UST removal, or if you're a veteran who could use a refresher, this course will take you through the steps of UST removal from plan check to closure letter. Incorporating photos, plans and documents from numerous actual UST pulls, the presentation will help attendees visualize the key concepts being discussed. An emphasis is placed on how to conduct the removal safely and compliantly.
Objective This Course will help familiarize participants with the resource materials in preparation for the ICC UST Inspector Exam.
Description This Course provides a practical review of the regulations, laws, and other resource materials that provide content for the ICC Inspector Exam. By connecting resource materials to field applications, the review will enhance participant knowledge of Title 23 of the California Code of Regulations, Chapter 6.7 of the Health and Safety Code, and applicable PEI standards. The Course is further designed to help illustrate the organization, usage, and relationships of the integral resources that are required knowledge for every UST inspector.
Though pre-recorded, this is an interactive Course. To get the most from this Course, participants should have a copy of 23CCR, Ch. 6.7 HSC, and PEI 500/900/1200 on hand during the Course in order to familiarize themselves with the content, look up information, and answer multiple choice questions throughout the Course.
Objective The information in this presentation is a summary of overfill prevention requirements specified in California Underground Storage Tank (UST) Regulations; and industry standards and manufacturer procedures for inspecting / testing specific types of equipment commonly encountered at UST facilities.
Description The information in this presentation is a summary of overfill prevention requirements specified in California Underground Storage Tank (UST) Regulations; and industry standards and manufacturer procedures for inspecting / testing specific types of equipment commonly encountered at UST facilities.
Objective The information contained in this presentation is intended to meet the requirements of the Unified Program Technical Training Framework and Improvement Strategies, Core Knowledge and Skills for satisfying Basic/Beginner Underground Storage Tank (UST) inspector training. It is merely a summary of the requirements specified in California Underground Storage Tank Law and Regulations. Likewise, it is not an ICC Exam preparatory class.
Description This course is an introduction to the world of underground storage tanks (UST) for new inspectors and more experienced inspectors who want to refresh basic skills; and for UST owners/operators who want to keep their facilities in compliance. Participants will be taken on a journey through topics such as: understanding provisions of California UST law and regulations; familiarity with the components and layout of typical UST systems; understanding requirements for performing and reporting testing of UST system components; familiarity with requirements for electronic submittals of UST information in the California Environmental Reporting System (CERS); understanding new and existing tank design, construction and monitoring requirements; and understanding of release recording and reporting requirements.
Objective This course will provide CUPAs with the historical context affecting current day management issues and effective tools for leading into the future.
Description This course will examine the CUPA program's rise to success, current day management issues, and approaches for leading into the future. Topics include acknowledging management methodologies of the past and embracing a style that is adaptable to change, addressing accountability and transparency by measuring progress through data, leading a diverse multi-generational workforce, and cultivating the workforce and technology.
Objective To cover Risk-Based Inspection (RBI) for storage tanks: Should I use it? Will the regulations accept it? What can go wrong? What are the pros and cons? Can I trust it?
Description The concept of Risk-Based Inspection (RBI) was popularized by API 580 & 581. The complex requirements make RBI implementation opaque, hard to understand and audit for compliance. The talk will cover the history & background, what the industry feedback is, conditions under which it should be allowed, and basic guidelines to validate the methodology for applying RBI to tanks. A brief discussion of similar service assessments will be included.
Objective To provide an overview of the Spill Prevention, Control, and Countermeasure (SPCC) requirements on oil water separators
Description This session will discuss the various uses of oil water separators and provide a detailed discussion of the SPCC requirements based on each use.
Objective To provide a summary of the Spill Prevention, Control, and Countermeasure (SPCC) Plan requirements on facility description and diagram
Description This session will cover the facility description and diagram requirements for SPCC Plans in accordance with 40 CFR Part 112. Discussions will include the prediction of direction, rate of flow, and total quantity of oil that could be discharged for each type of major equipment failure where experience indicates a reasonable potential for equipment failure. Examples of facility diagrams will also be discussed.
Objective To provide an overview of how to complete the SPCC Plan Template available to Qualified Facilities
Description Session will define Qualified Facilities, the differences between Tier I and Tier II, and will delve into common questions regarding completing the SPCC plan templates that Qualified Facilities are allowed to use, including: accurately completing tables in the Template; how to include oil-filled operational equipment and portable containers in the SPCC Plan; and how to address tanks and containers in various sections of the Tier I & II templates.
Objective This session will provide an overview and update on the requirements for tanks in underground areas (TIUGA).
Description This class will provide an overview and update of the APSA program as it relates to TIUGAs with an in-depth discussion of the various scenarios in tank system configurations.
Objective To provide a refresher on APSA
Description This session will provide a basic refresher on the California Aboveground Petroleum Storage Act (APSA) requirements with an emphasis on the Spill Prevention, Control, and Countermeasure (SPCC) Plan requirements of APSA.
Objective This session will delve deeper into components of a Shop Fabricated Tank inspection, updates of Standards that will affect what inspectors will see in the field, installation planning of a well designed system.
Description Informative discussions will examine:
Planning a tank installation
Required field integrity testing at installation.
Supports designed to handle tank, contents & dynamic forces
Updates to UL 142 & establishment of UL 142A for 2021.
Emergency generator tanks & other unique applications
What should be included in an SP 001 inspection report
Logistics of entering a tank for an SP 001 inspection
Designing tank appurtenances for proper application and operability
Objective Introduce regulators and regulated community to APSA code development, applicable standards, installation, and inspection techniques.
Description This session will have discussion on topics that include:
An introduction to STI & tank information resources
Regulatory/Code Development & which Standards are typically referenced by Codes.
Basics of Installation Procedures.
Development of a Shop Fabricated Tank Inspection Procedure and Standard for repairing tanks.
Tanks that do not fit APSA standards.
What are the typical parts of a tank system an inspector will encounter and how to recognize.
Objective This session will provide an informative discussion on satellite accumulation regulatory requirements and recommended best management practices.
Description This course will examine current applicable regulatory requirements surrounding satellite accumulation wastes, containers and storage areas. Participants will be given opportunities to evaluate storage areas for deficiencies and discuss appropriate recommended best management practice solutions to maintain compliance. The course will end with a review of pending GIR requirements.
Objective Explore disaster Hazmat handling, emergency protocols, health impact assessment, response coordination through EH training in emergency response.
Description This course is based on a hybrid model combining EH Training in Emergency Response (EHTER) awareness & operational levels. It provides a basic overview on disaster Hazmat handling, EH impacts, & California-specific Emergency Response protocols, to empower professionals in safeguarding communities & the environment.
Objective This session will provide participants with an update of the Hazardous Materials Area Plan (Area Plan) requirements and will cover various styles and formats of the Area Plan Update that will meet CalOES guidelines.
Description The Hazardous Materials Area Plan (Area Plan) program was established in 1986 to allow for local implementing agencies (UPA, CUPA) to respond to, minimize, and mitigate the impacts of a release or threatened release of hazardous materials within their jurisdictions. Area Plans are required to be updated every three years and are prepared in accordance with California Health and Safety Code Division 20, Chapter 6.95, Article 1, Section 25500 et. seq. and Title 19 California Code of Regulations, Division 2, Chapter 4, Article 3: Minimum Standards for Area Plans. Updates to Area Plans over the last several years include the renumbering of the Sections of the Area Plan, the addition of the response to a Pesticide Drift Exposure Incident under Article 1, Section 2622, and where applicable, the emergency communication plan for any release or threatened release from a refinery within the CUPAs jurisdiction in accordance with California AB 1646. The required elements of the Area Plan are as follows:
Article 1
2622: Pesticide Drift Exposure Incident
Article 3
2640: Proposed Area Plans
2642: Procedures and Protocols for Emergency Rescue Personnel
2643: Pre-Emergency Planning
2644: Notification and Coordination
2645: Training
2646: Public Safety and Information
2647: Supplies and Equipment
2648: Incident Critique and Follow-UP
Area Plans can be prepared using different styles and formats, and this is dependent upon the objectives and needs of the CUPA. The ultimate goal of the Area Plan is to make it functional, easy to access during an incident, contain all of the required elements of the Area Plan, and contain any additional information that the CUPA deems necessary. The narrative of the Area Plan should be concise and contain all the information required in Articles 1 and 3 above. Additional information and data relevant to the Area Plan and the individual CUPAs can be placed in Appendices as desired. This allows for easy access to both the basic Area Plan and the additional information contained within the appendices on an as-needed basis.
Area Plans can be completed in any format providing that the all the above elements are included in the document. One major format of the Area plan is to follow the sequencing of the elements shown above. Another typical format of an Area Plan is one that discusses the various elements in order of Preparedness, Response, Recovery, and Mitigation. Whatever format is utilized, it is important to know that the Area Plan is a living document that comprehensively supports the CUPAs requirements and provides a concise guide to response to a hazardous materials incident.
Objective Approaches to managing and effectively motivating staff during these uncertain times and beyond.
Description Some employees, whether seasoned or relatively new, may be resistant to changes that may come with the new normal. As a result, even though they may be doing good work, they may have decreased motivation impacting their commitment to their work, as well impacting their interactions with their co-workers. Topics will include: Employee engagement; Motivational factors; Motivating remotely; and best next steps.
Objective Developing leadership resilience to navigate the impacts and opportunities provided by current and future changes.
Description This interactive session is targeted to proactive leaders who want to help guide and drive their teams to take advantage of current opportunities to apply more innovative approaches to service delivery. Topics will include: How we are affected by, and cope with, change; and the ten most impactful actions for leaders to take now to begin to reimagine the work they do, how they do it and where they do it in response to change.
Objective How to navigate group dynamics so that rocking the boat can be considered a good thing when making effective decisions.
Description Groupthink happens when members of a team see whats happening to them and around them through a biased, narrow lens. The result can be that conclusions are reached too quickly, and teams often make bad decisions. Participants will explore what causes it, understand common warning signs to recognize it, and learn practical strategies that can be used to prevent and overcome groupthink.
Objective Understand how OEHHA addresses environmental justice and cumulative impacts in CA.
Learn about the CalEnviroScreen tool with examples and applications
Description The Director of OEHHA will introduce the work of our Office on environmental justice and racial equity, and its implications for state, regional, and local governments. A critical area of focus is the cumulative burden of environmental pollution and the vulnerabilities that the populations of different California communities face. CalEnviroScreen is a tool to assess potential cumulative impacts from pollutants that can assist decision-makers to prioritize resources to reduce burdens in the highly impacted communities.
Objective To provide hazardous waste generators an overview of the requirements for accumulation and storage of hazardous waste. For regulated businesses.
Description Training will introduce hazardous waste generators to Federal and State regulations applicable to hazardous waste generators. Determining generator status (LQG, SQG or CESQG), overview of RCRA waste vs. non-RCRA hazardous waste, accumulation time limits and container and tank management standards will be covered. Training will also cover the CUPAs role for inspections and enforcement of these regulations.
Objective This session will be an intermediate class on the business plan program.
Description This course will cover intermediate topics of the Business Plan Program.
Objective This session will provide students with basic and introductory fundamentals of the hazardous materials business plan program.
Description This course will cover the introductory concepts of the hazardous materials business plan program. Goal of the course will cover Business Plan General Requirements, Hazardous Materials Inventory Reporting Requirements, Alternative Hazardous Materials Inventory Requirements, Hazardous Materials Inventory Submittal, Emergency Planning and Community Right to Know Act Compliance Requirements, Emergency Response Plans and Procedures, and Training.
Objective Review & explain complex and uncommon HMBP reporting requirements and exemptions to the experienced CUPA inspector or seasoned industry representative.
Description An intermediate training that covers HMBP exemptions, rules for reporting mixtures, amd other regulatory updates. We will test the newly acquired knowledge. This is essentially the same presentation as in 2020 with the area plan section removed.
Objective Provide guidance for using EPAs required SPCC Template Plan for Tier I Qualified Facilities.
Description .This topic will provide guidance for regulated entities on completing an SPCC Plan using EPAs Template for Tier I Qualified Facilities. The presentation will review the Tier I applicability, describe the requirements which are relaxed or more rigid versus the standard SPCC Plan requirements, and describe practical issues in completing EPAs Template Plan and for CUPA inspectors in reviewing the Plan.
Test Content Post_page_content
All Courses CalARP (6) HazWaste (13) UST (7) Admin/Mgt/Leadership (1) APSA (8) Industry (1) Emergency Response (2) Potpourri (5) HMBP (3) Demonstrations (1)
Conducting an Effective Process Hazard Analysis (2023)
REHS: 2.0
2023 · Intermediate · 1.2 hours
Recent Changes to Ammonia Refrigeration (RAGAGEP) (2023)
REHS: 2.0
2023 · Intermediate · 1.7 hours
Human Factors (2023)
REHS: 2.0
2023 · Intermediate · 1.7 hours
CALARP 101 (2023)
REHS: 2.0
2023 · Beginner · 1.4 hours
Mechanical Integrity Inspection of an Ammonia Pressure Vessel (2023)
REHS: 2.0
2023 · Intermediate · 1.7 hours
CALARP 201 - An Intermediate Review (2023)
REHS: 2.0
2023 · Intermediate · 1.7 hours
Conditionally Excluded Hazardous Waste (2023)
REHS: 2.0
2023 · Beginner · 1.9 hours
Advanced Hazardous Waste Characterization (2023)
REHS: 2.0
2023 · Advanced · 1.7 hours
Introduction To CA Tiered Permitting Program (2023)
REHS: 2.0
2023 · Intermediate · 1.5 hours
Shooting Range Maintenance Guidance (2022)
REHS: 1.0
2022 · Beginner · 1.0 hours
Hazardous Waste Identification - Basic (2021)
REHS: 4.0
2021 · Beginner · 3.6 hours
Recycling, Exemptions & Exclusions - Basic (2021)
REHS: 4.0
2021 · Beginner · 1.8 hours
Tiered Permitting Overview (2021)
REHS: 2.0
2021 · Beginner · 1.6 hours
Hazardous Waste Identification - Intermediate (2021)
REHS: 2.0
2021 · Intermediate · 1.7 hours
Hazardous Waste 101 (2021)
REHS: 4.0
2021 · Beginner · 3.5 hours
Use of the Uniform Hazardous Waste Manifest (2021)
REHS: 2.0
2021 · Intermediate · 1.7 hours
Remote Site Consolidation of Non-RCRA Hazardous Waste (2022)
REHS: 1.0
2022 · Intermediate · 1.0 hours
In Depth Manifest Training (2022)
REHS: 2.0
2022 · Intermediate · 1.7 hours
In Depth Satellite Accumulation Requirements (2022)
REHS: 2.0
2022 · Intermediate · 1.8 hours
Applying UST Red Tag Authority (2024)
REHS: 2.0 ICC: 2.0
2024 · Intermediate · 1.6 hours
Intermediate and Advanced UST Inspector 201/301
REHS: 4.0 ICC: 4.0
2021 · Intermediate · 3.2 hours
Technical Details: Single-Walled Systems
REHS: 2.0 ICC: 2.0
2023 · Intermediate · 1.5 hours
UST Removals: How to Ensure Safety and Compliance
REHS: 1.0 ICC: 1.0
2021 · Beginner · 1.5 hours
Preparing for the ICC UST Inspector Exam
REHS: 3.0 ICC: 3.0
2021 · Beginner · 2.7 hours
UST Overfill Prevention
REHS: 2.0 ICC: 2.0
2021 · Intermediate · 1.8 hours
Beginner UST Inspector 101
REHS: 6.0 ICC: 6.0
2021 · Beginner · 5.5 hours
CUPA Leadership: Celebrating the Past and Artfully Moving Forward
REHS: 2.0
2023 · Beginner · 1.6 hours
Risk-Based Inspection of Storage Tanks
REHS: 2.0
2023 · Intermediate · 1.6 hours
Oil Water Separators in the SPCC World
REHS: 2.0
2023 · Beginner · 1.3 hours
SPCC PLAN: Facility Descriptions and Diagrams (2023)
REHS: 2.0
2023 · Intermediate · 1.6 hours
Completing the SPCC Template for Qualified Facilities (2023)
REHS: 1.5
2023 · Beginner · 1.3 hours
Tanks in Underground Areas (TIUGA)
REHS: 1.0
2021 · Beginner · 1.0 hours
APSA Refresher
REHS: 2.0
2022 · Intermediate · 1.6 hours
STI Workshop - Advanced
REHS: 2.0
2021 · Intermediate · 1.7 hours
STI Workshop - The Basics
REHS: 2.0
2021 · Beginner · 1.7 hours
Satellite Area Accumulation: Achieving & Maintaining Compliance (2023)
REHS: 2.0
2023 · Beginner · 1.5 hours
Principles of EHTER (2024)
REHS: 2.0
2024 · Intermediate · 1.7 hours
Hazardous Materials Area Plan Updates - Update Your Update
REHS: 1.0
2022 · Beginner · 0.9 hours
How to Keep Your Staff Involved and Engaged
REHS: 1.5
2023 · Intermediate · 1.6 hours
Resilient Leadership
REHS: 1.5
2023 · Intermediate · 1.6 hours
Avoiding GroupThink
REHS: 1.5
2023 · Intermediate · 1.4 hours
Environmental Justice and Cumulative Impacts in CA Communities
REHS: 2.0
2021 · Beginner · 1.6 hours
FREE COURSE - Basics of Hazardous Waste Training for Industry (INFORMATION ONLY)
2022 · Beginner · 4.0 hours
Also, here is a link to the Session Presentation Zip File (lots of great information here for you).
HMBP 201 (2023)
REHS: 2.0
2023 · Intermediate · 1.5 hours
HMBP 101 (2023)
REHS: 2.0
2023 · Beginner · 1.5 hours
HMBP 201: Beyond the Basics
REHS: 2.0
2021 · Intermediate · 1.7 hours
The Tier I Facility SPCC Plan: Guidance on Completing by YORKE
REHS: 1.0
2021 · Beginner · 1.0 hours